A vortex ring, also called a toroidal vortex, is a region of rotating fluid moving through the same or different fluid where the flow pattern takes on a toroidal (doughnut) shape. The movement of the fluid is about the poloidal or circular axis of the doughnut, in a twisting vortex motion. Examples of this phenomenon are a smoke ring or a microburst[1][2]
Contents |
Vortex rings were first mathematically analysed by the German physicist Hermann von Helmholtz, in his paper of 1867 On Integrals of the Hydrodynamical Equations which Express Vortex-motion.[3] Smoke rings have probably been observed since antiquity since they can easily be blown from the mouth.
One way a vortex ring may be formed is by pushing a spherical mass of fast moving fluid (A) into a mass of stationary fluid (B). A and B may chemically be the same fluid. As B hits the ball of A it pushes the outer layers of A with it. The inner layers are less affected. The main mass of A forms a 'shadow' of lower pressure behind it, and the layer peeled off by B begins to curve round back into the main mass of A. This inward curving flow initiates the vortex, and splits it into a doughnut shape. Now B flows past both the inner and outer circumferences of the doughnut. The greater outer perimeter causes a net rolling the doughnut of A.
The leading edge of a plume, sometimes called the 'starting-plume', usually has a vortex-ring structure, as does a smoke ring. The motion of an isolated vortex ring and the interaction of two or more vortices are discussed in eg Batchelor's text book.[4]
For many purposes a ring vortex may be approximated as having a vortex-core of small cross-section. However a simple theoretical solution, called Hill's spherical vortex,[5] is known in which the vorticity is distributed within a sphere (the internal symmetry of the flow is however still annular). Such a structure or an electromagnetic equivalent has been suggested as an explanation for the internal structure of ball lightning. For example, Shafranov used a magnetohydrodynamic (MHD) analogy to Hill's stationary fluid mechanical vortex to consider the equilibrium conditions of axially symmetric MHD configurations, reducing the problem to the theory of stationary flow of an incompressible fluid. In axial symmetry, he considered general equilibrium for distributed currents and concluded under the Virial Theorem that if there were no gravitation, a bounded equilibrium configuration could exist only in the presence of an azimuthal current.
Vortex ring state (VRS), also known as settling with power, is a hazardous condition encountered in helicopter flight. It happens when three things occur during flight: A high rate of descent, an airspeed lower than effective translational lift, and when the helicopter is using a large portion of its available power. A helicopter's main rotor typically directs airflow downwards to create lift, but with low horizontal airspeed, it induces a vortex ring. A toroid-shaped path of airflow circumscribes the blade disc, as the airflow moves down through the disc, then outward, up, inward, and then down through the top again. This re-circulation of flow can negate much of the lifting force and cause a catastrophic loss of altitude. Specific to vortex ring state is that the helicopter, operating in its own downwash, is descending through descending air. Applying more power (increasing collective pitch) serves to further accelerate the downwash through which the main-rotor is descending, exacerbating the condition.
In single rotor helicopters, a VRS can be corrected by moving the cyclic forward, which controls the pitch angle of the rotor blade, slightly pitching nose down, and establishing forward flight. In tandem-rotor helicopters, recovery is accomplished through lateral cyclic or pedal input. The aircraft will fly into "clean air", and will be able to regain lift.
One of the most important fluid phenomena observed in the left ventricle during cardiac relaxation (diastole) is the vortex ring that develops with a strong jet entering through the mitral valve. The presence of these flow structures that develop during cardiac diastole was initially recognized by in-vitro visualization of the ventricular flow[6][7] and subsequently strengthened by analyses based on color Doppler mapping[8][9] and Magnetic Resonance Imaging.[10][11] Some recent studies[12][13] have also confirmed the presence of a vortex ring during rapid filling phase of diastole and implied that the process of vortex ring formation can influence on mitral annulus dynamics.
A kind of azimuthal radiant-symmetric structure was observed by Maxworthy[14] when the vortex ring traveled around a critical velocity, which is between the turbulence and laminar states. Later Huang and Chan[15] reported that if the initial state of the vortex ring is not perfectly circular, another kind of instability would occur. An elliptical vortex ring undergoes an oscillation in which it is first stretched in the vertical direction and squeezed in the horizontal direction, then passes through an intermediate state where it is circular, then is deformed in the opposite way (stretched in the horizontal direction and squeezed in the vertical) before reversing the process and returning to the original state.